Subwoofers: Subwoofers: 13.5" & 15" Subwoofers

JL Audio 13W1v2
13-inch subwoofer driver (350W, 4 or 8 ohm)
W1v2’s are poised to establish a new standard for affordable bass excellence thanks to technologies originally developed for our flagship W7 and W6v2 subwoofers. These include JL Audio’s patented VRC™, Elevated Frame-Cooling and Floating Cone Attach Method™ technologies, along with an innovative, insert-molded spider assembly with integral push-terminals and special strain-relief features. As with JL Audio’s flagship drivers, development was guided by JL Audio’s proprietary DMA modeling system to deliver outstanding dynamic stability and low-distortion operation within their intended power envelope. Optimized for compact enclosures and moderate power levels, and specifically engineered to reduce mounting depth, the W1v2's open up a whole new range of application options.
Nominal Diameter: 13.5 in. (345 mm)
Continuous Power Handling: 350 W
Xmax: 0.475 in. / 12.1 mm one-way, linear
Impedance: 4 or 8 ohm (SVC)
Mounting Depth: 5.9 in. / 150 mm
Suggested Retail: $199.99
Our Price: $179.99
JL Audio 13W3v3
13-inch subwoofer driver (600W, 2, 4, or 8 ohm)
Clearly the best sounding W3's yet, these subwoofers feature DMA-optimized, long linear excursion capability to minimize distortion and increase output. W3v3's are available in single 2 ohm, 4 ohm and 8 ohm versions (6W3v3 available in 4 ohm and 8 ohm only) and are superb performers at medium power levels in compact sealed or ported enclosures. Multiple patented technologies enhance performance and reliability. As with JL Audio’s flagship drivers, development was guided by JL Audio’s proprietary DMA (Dynamic Motor Analysis) modeling system to deliver outstanding dynamic stability and low-distortion operation within their intended power envelope.
Nominal Diameter: 13.5 in. (345 mm)
Continuous Power Handling: 600 W
Xmax: 0.610 in. / 15.5 mm one-way, linear
Impedance: 2, 4, or 8 ohm (SVC)
Mounting Depth: 7.63 in. / 194 mm
Suggested Retail: $349.99
Our Price: $319.99





JL Audio 13W6v2-D4
13-inch subwoofer driver (750W, dual 4 ohm voice coils)
At first glance, you’re likely to notice the striking cast alloy frame design. These frames are much more than cosmetic enhancements, having been specifically engineered to provide increased clearance for greater excursion and to incorporate our patented Elevated Frame-Cooling technology. This cooling scheme directs high-velocity air flow over the top surface of the top-plate and onto the upper portion of the voice coil windings (the two hottest parts on a woofer). For style points, the mounting flange of the frame is dressed with a removable black trim ring (Patented) which can be painted to match the theme of the installation. Like the W7’s, the W6v2 subwoofers benefit from JL AUDIO’s proprietary Dynamic Motor Analysis system (DMA). This advanced technology allows us to optimize motor behavior, while taking into account the effects of real power flowing across the voice coil. The result is dynamically stable and linear motor behavior, which translates directly into reduced distortion and improved transient performance.
Nominal Diameter: 13.5 in. (345 mm)
Continuous Power Handling: 750 W
Xmax: 0.85 in. / 21.6 mm one-way, linear
Impedance: 4 ohm (DVC)
Mounting Depth: 9.2 in. / 234 mm
Suggested Retail: $639.99
Our Price: $639.99





JL Audio 13W7
13.5-inch subwoofer driver (1500W, Dual 1.5 ohm voice coils)
The W7 embodies JL Audio’s commitment to pushing the envelope of speaker technology, with six patented technologies and a completely unique set of component parts. Each W7 model has been meticulously engineered to reproduce sub-bass with extreme fidelity at any volume level. At first glance, you may only see a rather massive woofer, but as you begin to analyze the technology and the performance envelope of a W7, you will realize that they are much more than just another big SPL speaker. For us, designing a pure SPL speaker, with no regard to sound quality, would have presented a far lesser challenge than the one we chose to undertake with the W7 project. The goal was to design subwoofer drivers that deliver immense output with an extremely high level of fidelity. It wouldn’t be enough for the speaker to sound great or be loud, it had to do both. This goal required us to develop a deeper understanding of the inner behavior of speakers, new and proprietary modeling systems and six new, patented or patent-pending technologies. We could have made a good-sounding, big speaker without going through any of this effort, but we chose to stretch our limits and devote the time and resources necessary to create a real breakthrough.
Nominal Diameter: 13.5 in. (345 mm)
Continuous Power Handling: 1500 W
Xmax: 1.25 in. / 32 mm one-way, linear
Impedance: Dual 1.5 ohm
Mounting Depth: 10.5 in. / 267 mm
Suggested Retail: $1,199.99
Our Price: $1,199.99









JL Audio 13TW5-3
13.5-inch thin-line subwoofer driver (600W, 3 ohm)
Creating great sounding bass is not that difficult when the available space in the vehicle is generous and you use high quality drivers. When space is limited (like in stealthy custom installations or behind the seats of a truck or sports car), achieving excellent low frequency performance becomes far more challenging. One way to deal with this is to use small subwoofer drivers, like our 6.5-inch or 8-inch models, but if the goal is higher output bass than the small drivers can comfortably deliver, a more potent solution is needed. This is precisely where the new TW5 subwoofers slot into the lineup, offering groundbreaking performance in the tightest space applications. The patented thin-line woofer technology compresses the architecture of the woofer to make it all happen. Central to the technology is the “concentric tube” structure that supports the oversized voice coil and the suspension attachments. This permits placing the motor of the woofer much further forward in the speaker than with conventional designs, while maintaining excellent linear excursion capability.
Nominal Diameter: 13.5 in. (345 mm)
Continuous Power Handling: 600 W
Xmax: 0.383 in. / 9.7 mm one-way, linear
Impedance: 3 ohm
Mounting Depth: 2.54 in./65mm
Suggested Retail: $569.99
Our Price: $569.99
Rockford Fosgate P115
15" Punch P1 4 or 8-Ohm SVC Subwoofer
If you're looking for big bass on a budget, look no further than the P1 15" subwoofers. They perform best in small sealed and vented enclosures unleashing the deep bass that made Rockford Fosgate famous.
Voice Coil Diameter 1.5" 6-Layer (3.81 cm)
200 Watts RMS
400 Watts Max
Impedance: 4 or 8 ohm (SVC)
Mounting Depth: 6.875 in. (16.83 cm)
Suggested Retail: $169.99
Our Price: $149.99
Rockford Fosgate P215
15" Punch P2 2 or 4-Ohm DVC Subwoofer
Rockford Fosgate has always been known as “The PUNCH” and the P2 15" subwoofers certainly continue with the tradition. With their 2-Ohm Dual Voice Coils, they are an easy addition to almost any vehicle, the P2 subwoofers perform best in standard sealed and vented enclosures and their double-stacked magnets deliver REAL Bass!
Voice Coil Diameter 2.0" 4-Layer (5.08 cm)
250 Watts RMS
500 Watts Max
Impedance: 2 or 4 ohm (DVC)
Mounting Depth: 7.125 in. (18.10 cm)
Suggested Retail: $229.99
Our Price: $199.99
Rockford Fosgate P315
15" Punch P3 2 or 4-Ohm DVC Subwoofer
Bass for your face! With over a two-inch excursion, the P3 15" subwoofers can definitely move your music to the next level. Add a P3 15" subwoofer to your ride and you'll never be mistaken for "quiet" ever again!
Voice Coil Diameter 2.5" 4-Layer (6.35 cm)
500 Watts RMS
1000 Watts Max
Impedance: 2 or 4 ohm (DVC)
Mounting Depth: 7.625 in. (19.37 cm)
Suggested Retail: $349.99
Our Price: $299.99
Rockford Fosgate T115
15" POWER T1 2 or 4-Ohm DVC Subwoofer
You know what they say about guys with BIG subwoofers? They have no trunk space! The T1 15" subwoofers will offer the most output when a slot-ported enclosure is used.
Voice Coil Diameter 3" anodized aluminum
600 Watts RMS
1200 Watts Max
Impedance: 2 or 4 ohm (DVC)
Mounting Depth: 8.375 in. (21.27 cm)
Suggested Retail: $499.99
Our Price: $449.99
Rockford Fosgate T215
15" POWER T2 2 or 4-Ohm DVC Subwoofer
Large and in charge! With a massive triple stacked 304 oz. motor, the T2 15" subwoofers can handle even the most extreme power levels. They'll certainly hear you coming with a T2 15" subwoofer in your vehicle..
Voice Coil Diameter 4" anodized aluminum
1000 Watts RMS
2000 Watts Max
Impedance: 2 or 4 ohm (DVC)
Mounting Depth: 9.875 in. (25.08 cm)
Suggested Retail: $849.99
Our Price: $799.99
© Copyright 2009 Eminent Hi-Fi - All Rights Reserved