Eminent Hi-Fi

Subwoofers: Subwoofers: 10" Subwoofers

JL Audio 10W0v2

10-inch subwoofer driver (300W, 4 ohm)

The term “overbuilt” gets thrown around a lot, but in the case of the W0v2's, it actually applies. With a beefy 2.0-inch voice coil and JL Audio's patented Elevated Frame Cooling, they're certainly capable of handling power. They also offer best-in-class excursion capability, with motors refined using JL Audio's exclusive DMA modeling system for increased output and better sound quality. In simple terms, when the going gets loud, the W0v2's are built to perform like no other woofers in their price class.

Nominal Diameter: 10 in. (250 mm)

Continuous Power Handling: 300 W

Xmax: 0.45 in. (11.4 mm) one-way, linear

Impedance: 4 ohm (SVC)

Mounting Depth: 4.90 in. (124 mm)

Suggested Retail: $109.99

Our Price: $99.99

Recommended Accessories:

JL Audio 10W1v2

10-inch subwoofer driver (300W, 4 or 8 ohm)

W1v2’s are poised to establish a new standard for affordable bass excellence thanks to technologies originally developed for our flagship W7 and W6v2 subwoofers. These include JL Audio’s patented VRC™, Elevated Frame-Cooling and Floating Cone Attach Method™ technologies, along with an innovative, insert-molded spider assembly with integral push-terminals and special strain-relief features. As with JL Audio’s flagship drivers, development was guided by JL Audio’s proprietary DMA modeling system to deliver outstanding dynamic stability and low-distortion operation within their intended power envelope. Optimized for compact enclosures and moderate power levels, and specifically engineered to reduce mounting depth, the W1v2's open up a whole new range of application options.

Nominal Diameter: 10 in. (250 mm)

Continuous Power Handling: 300 W

Xmax: 0.375 in. (9.5 mm) one-way, linear

Impedance: 4 or 8 ohm (SVC)

Mounting Depth: 4.34 in. (110 mm)

Suggested Retail: $139.99

Our Price: $129.99

Recommended Accessories:

JL Audio 10W3v3

10-inch subwoofer driver (500W, 2, 4, or 8 ohm)

Clearly the best sounding W3's yet, these subwoofers feature DMA-optimized, long linear excursion capability to minimize distortion and increase output. W3v3's are available in single 2 ohm, 4 ohm and 8 ohm versions (6W3v3 available in 4 ohm and 8 ohm only) and are superb performers at medium power levels in compact sealed or ported enclosures. Multiple patented technologies enhance performance and reliability. As with JL Audio’s flagship drivers, development was guided by JL Audio’s proprietary DMA (Dynamic Motor Analysis) modeling system to deliver outstanding dynamic stability and low-distortion operation within their intended power envelope.

Nominal Diameter: 10 in. (250 mm)

Continuous Power Handling: 500 W

Xmax: 0.55 in. (14 mm) one-way, linear

Impedance: 2, 4, or 8 ohm (SVC)

Mounting Depth: 5.25 in. (133 mm)

Suggested Retail: $259.99

Our Price: $239.99

Recommended Accessories:

JL Audio 10W6v2-D4

10-inch subwoofer driver (600W, dual 4 ohm voice coils)

At first glance, you’re likely to notice the striking cast alloy frame design. These frames are much more than cosmetic enhancements, having been specifically engineered to provide increased clearance for greater excursion and to incorporate our patented Elevated Frame-Cooling technology. This cooling scheme directs high-velocity air flow over the top surface of the top-plate and onto the upper portion of the voice coil windings (the two hottest parts on a woofer). For style points, the mounting flange of the frame is dressed with a removable black trim ring (Patented) which can be painted to match the theme of the installation. Like the W7’s, the W6v2 subwoofers benefit from JL AUDIO’s proprietary Dynamic Motor Analysis system (DMA). This advanced technology allows us to optimize motor behavior, while taking into account the effects of real power flowing across the voice coil. The result is dynamically stable and linear motor behavior, which translates directly into reduced distortion and improved transient performance.

Nominal Diameter: 10 in. (250 mm)

Continuous Power Handling: 600 W

Xmax: 0.6 in. (15.2 mm) one-way, linear

Impedance: 4 ohm (DVC)

Mounting Depth: 6.9 in. (175 mm)

Suggested Retail: $439.99

Our Price: $439.99

Recommended Accessories:

JL Audio 10W7

10-inch subwoofer driver (750W, 3 ohm)

The W7 embodies JL Audio’s commitment to pushing the envelope of speaker technology, with six patented technologies and a completely unique set of component parts. Each W7 model has been meticulously engineered to reproduce sub-bass with extreme fidelity at any volume level. At first glance, you may only see a rather massive woofer, but as you begin to analyze the technology and the performance envelope of a W7, you will realize that they are much more than just another big SPL speaker. For us, designing a pure SPL speaker, with no regard to sound quality, would have presented a far lesser challenge than the one we chose to undertake with the W7 project. The goal was to design subwoofer drivers that deliver immense output with an extremely high level of fidelity. It wouldn’t be enough for the speaker to sound great or be loud, it had to do both. This goal required us to develop a deeper understanding of the inner behavior of speakers, new and proprietary modeling systems and six new, patented or patent-pending technologies. We could have made a good-sounding, big speaker without going through any of this effort, but we chose to stretch our limits and devote the time and resources necessary to create a real breakthrough.

Nominal Diameter: 10 in. (250 mm)

Continuous Power Handling: 750 W

Xmax: 0.9 in. (23 mm) one-way, linear

Impedance: 3 ohm (DVC)

Mounting Depth: 8.0 in. (203 mm)

Suggested Retail: $639.99

Our Price: $639.99

Recommended Accessories:

Rockford Fosgate R1S410

10" Prime 4-Ohm SVC Subwoofer

The Prime 10" woofers offer Rockford Fosgate performance at an unbelievable value. These models feature solid stamped steel frame, quick-release compression terminals, and a Parabolic polypropylene cone. Best of all, they work great in sealed enclosures.

Nominal Diameter: 10 in. (250 mm)

150 Watts RMS

300 Watts Max

Impedance: 4 ohm (SVC)

Mounting Depth:4.57 in. (11.60 cm)

Suggested Retail: $89.99

Our Price: $69.99

Recommended Accessories:

Rockford Fosgate P110

10" Punch P1 4 or 8-Ohm SVC Subwoofer

The P1 10" subwoofers are a great choice for those looking to add some PUNCH to their system without breaking the bank. They are designed for small enclosures, so they won't monopolize your trunk space either.

Nominal Diameter: 10 in. (250 mm)

150 Watts RMS

300 Watts Max

Impedance: 4 or 8 ohm (SVC)

Mounting Depth: 5.125 in. (13.02 cm)

Suggested Retail: $109.99

Our Price: $99.99

Recommended Accessories:

Rockford Fosgate P210

10" Punch P2 2 or 4-Ohm DVC Subwoofer

Rockford Fosgate has always been known as “The PUNCH” and the P2 10" subwoofers certainly continue with the tradition. With their 4-Ohm Dual Voice Coils, they are an easy addition to almost any vehicle, the P2 subwoofers perform best in standard sealed and vented enclosures and their double-stacked magnets deliver REAL Bass!

Nominal Diameter: 10 in. (250 mm)

250 Watts RMS

500 Watts Max

Impedance: 2 or 4 ohm (DVC)

Mounting Depth: 5.75 in. (14.61 cm)

Suggested Retail: $159.99

Our Price: $139.99

Recommended Accessories:

Rockford Fosgate P3S10

10" Punch P3 2 or 4-Ohm DVC Shallow Subwoofer

The Rockford Fosgate P3 10" Shallow Mount subwoofer delivers the Punch - even in depth limited mounting situations. All vehicles are not the same: some can accommodate deep subwoofers and some can't. In the past that meant no Bass. Not anymore! Now even depth challenged vehicles can have REAL Bass and the Dual Voice Coil allows configurations for every application. Shallow woofers are designed for challenging spaces when a traditional woofer cannot be used.

Nominal Diameter: 10 in. (250 mm)

300 Watts RMS

600 Watts Max

Impedance: 2 or 4 ohm (DVC)

Mounting Depth: 3.50 in. (8.89 cm)

Suggested Retail: $249.99

Our Price: $199.99

Recommended Accessories:

Rockford Fosgate P310

10" Punch P3 2 or 4-Ohm DVC Subwoofer

An awesome choice whether you want to add one or multiple subwoofers to your vehicle. The P3 10" subwoofers can be used in either sealed or ported enclosures, plus you'll get the wiring flexibility of dual voice coils.

Nominal Diameter: 10 in. (250 mm)

400 Watts RMS

800 Watts Max

Impedance: 2 or 4 ohm (DVC)

Mounting Depth: 6.25 in. (15.56 cm)

Suggested Retail: $269.99

Our Price: $219.99

Recommended Accessories:

Rockford Fosgate T110

10" POWER T1 2 or 4-Ohm DVC Subwoofer

Whether you prefer the tight punchy sound of a sealed enclosure or the booming output of a ported enclosure, the T1 10" subwoofers got you covered. Versatile, powerful, and good looking to boot.

Nominal Diameter: 10 in. (250 mm)

600 Watts RMS

1200 Watts Max

Impedance: 2 or 4 ohm (DVC)

Mounting Depth: 6.25 in. (15.58 cm)

Suggested Retail: $399.99

Our Price: $349.99